337.75 PART DESCRIPTION HOURS
TOTAL HOURS DATE
12/1/01 ORDERED PLANS
FORMS/JIGS/TOOLING 39.5 12/26/03 5 MADE MASTER TEMPLATE 3
TIP RIBS 4 1/6/04 ORDERED ALUMINUM FROM WICKS
NOSE RIBS 18.5 1/19/04 5 MADE ALL FORM BLOCKS FOR WING 6
CENTER RIBS 17 1/30/04 ALUMINUM ORDER FROM WICKS FINALLY ARRIVES!
BACK RIBS 3 2/15/04 5 MADE ALL ROUTING TEMPLATES 6
AILERON RIBS 5 3/13/04 5 MADE FIRST THREE TRIAL NOSE RIBS 4
AILERON NOSE RIBS 3.5 3/14/04 5 MADE FIRST ACCEPTABLE NOSE RIB 1
AILERON POCKET RIBS 2.5 3/19/04 7 CUT & ROUTERED ALL 46 NOSE RIBS 6.5
FLAP RIBS 5.5 3/21/04 7 DEBURRED, POLISHED, FORMED FLANGES ON 23 RIGHT WING NOSE RIBS 6
FLAP NOSE RIBS 3.5 3/27/04 7 DEBURRED, POLISHED, FORMED FLANGES ON 23 LEFT WING NOSE RIBS 6
ATT/STIFF ANGLES 7 4/3/04 5 MADE SHORT CENTER RIB ROUTING TEMPLATE 0.5
MAIN SPARS 51.5 4/3/04 8 CUT, ROUTERED, DEBURRED 26 CENTER RIBS 8
REAR SPARS 34 4/4/04 8 FLANGED & STRAIGHTENED 12 .032 CENTER RIBS, AND 2 .025 CENTER RIBS 3.5
AILERON SPARS 3 4/10/04 8 FLANGED & STRAIGHTENED 12 .025 CENTER RIBS 5.5
FLAP SPARS 3 4/11/04 5 MADE FLAP & AILERON RIB FORMS & ROUTING TEMPLATES 3.5
FALSE SPARS 0 4/16/04 9 CUT, ROUTERED, DEBURRED, FORMED, AND STRAIGHTENED 4 BACK RIBS 3
WING STEEL PARTS 48 4/17/04 10 CUT, ROUTERED, DEBURRED, POLISHED 16 AILERON RIBS 2.75
FUEL TANKS 0 4/17/04 13 CUT, ROUTERED, DEBURRED, POLISHED 18 FLAP RIBS 3
TAIL 32.25 4/18/04 10 FLANGED & STRAIGHTENED 16 AILERON RIBS 2.25
CONTROLS 57 4/18/04 13 FLANGED & STRAIGHTENED 18 FLAP RIBS 2.5
FUSELAGE 0 4/20/04 5 MADE FLAP NOSE, AILERON NOSE, AND AILERON POCKET RIB FORMS & ROUTING TEMPLATES 2
PRIMING & PAINTING (INCLUDES PREP) 0 4/22/04 14 CUT, ROUTERED FLAP NOSE RIBS 1
4/22/04 11 CUT, ROUTERED AILERON NOSE RIBS 0.75
4/22/04 12 CUT, ROUTERED AILERON POCKET RIBS 0.75
4/23/04 14 DEBURRED, POLISHED, AND FORMED FLAP NOSE RIBS 2.5
4/24/04 11 DEBURRED, POLISHED, AND FORMED AILERON NOSE RIBS 1.75
4/24/04 12 DEBURRED, POLISHED, AND FORMED AILERON POCKET RIBS 1.75
4/25/04 11 DRILLED AND DEBURRED 3/4" HOLES IN AILERON POCKET RIBS 1
4/25/04 6 CUT AND ROUTERED TIP RIBS 1
4/27/04 6 DEBURRED, POLISHED, FORMED, AND STRAIGHTENED 2 TIP RIBS 3
5/30/04 16 CUT AND DEBURRED ALL FRONT SPAR CAPSTRIP SPACERS 1
5/30/04 17 CUT AND DEBURRED ALL REAR SPAR CAPSTRIP SPACERS 0.5
8/28/04 5 MADE REAR SPAR END ROUTING TEMPLATES 0.5
8/28/04 17 CUT AND DEBURRED 4 REAR SPAR ENDS 2.5
10/1/04 5 MADE MAIN SPAR END ROUTING TEMPLATES 0.5
10/1/04 16 CUT AND DEBURRED 4 MAIN SPAR ENDS 2.5
10/2/04 5 MADE MAIN SPAR SPLICE ROUTING TEMPLATES 0.5
10/2/04 16 CUT AND DEBURRED 4 MAIN SPAR SPLICE PLATES 2
10/3/04 16 MADE MAIN SPAR ATTACH PLATE SPACER TEMPLATES 0.5
10/3/04 16 CUT AND DEBURRED 4 MAIN SPAR ATTACH PLATE SPACERS 2
10/9/04 17 CUT AND DEBURRED REAR ATTACH PLATE SPACERS AND SPLICES 2.5
11/6/04 18 SHEARED AND DEBURRED ALL AILERON SPAR BLANKS, GUSSETS, AND DOUBLER PLATES 3
11/6/04 19 SHEARED AND DEBURRED ALL FLAP SPAR BLANKS, GUSSETS, AND DOUBLER PLATES 3
11/7/04 16 SHEARED AND DEBURRED MAIN SPAR BLANKS 2
11/7/04 17 SHEARED AND DEBURRED REAR SPAR BLANKS 2
11/18/04 16 CUT LIGHTENING HOLES AND CAPSTRIPS FOR RIGHT MAIN SPAR 2
11/19/04 16 SET UP SPAR FOR DRILLING 1
11/26/04 15 SHEARED ALL 4' ANGLE MATERIAL 1
11/27/04 15 CUT ALL ANGLES TO LENGTH 2.5
11/28/04 16 DRILL FIRST HALF OF RIGHT MAIN SPAR 6
12/4/04 16 DRILLING RIGHT MAIN SPAR 3.5
12/5/04 16 DRILLING RIGHT MAIN SPAR 1
12/6/06 16 DRILLING RIGHT MAIN SPAR 1.5
12/7/04 16 DRILLING RIGHT MAIN SPAR 1
12/7/04 16 DRILLING RIGHT MAIN SPAR 2
12/11/04 5 MADE WING STEEL TEMPLATES 0.75
12/11/04 21 CUT WING STEEL PARTS 1
12/12/04 21 CUT WING STEEL PARTS 2.5
12/18/04 21 SHAPING, DEBURRING, POLISHING WING STEEL PARTS 3.5
12/19/04 21 SHAPING, DEBURRING, POLISHING WING STEEL PARTS 3
1/15/05 16 DRILLED RIGHT SPAR ATTACH BARS 1
1/16/05 16 DEBURRED RIGHT MAIN SPAR AND ASSOCIATED PIECES 2.5
1/16/05 15 BENT, DRILLED, AND DEBURRED ATTACH ANGLES 1
1/17/05 16 CUT LIGHTENING HOLES AND CAPSTRIPS FOR LEFT MAIN SPAR 1.5
1/30/05 16 SET UP LEFT MAIN SPAR FOR DRILLING 1
2/4/05 16 DRILLING LEFT MAIN SPAR 1
2/5/05 16 DRILLING LEFT MAIN SPAR 4
2/6/05 16 DRILLING LEFT MAIN SPAR 2.5
2/7/05 16 DRILLING LEFT MAIN SPAR 4
2/9/05 16 DRILLING LEFT MAIN SPAR 1
2/13/05 16 DRILLING & DEBURRING LEFT MAIN SPAR 3.5
2/13/05 15 BENT, DRILLED, AND DEBURRED ATTACH ANGLES 1
2/14/05 16 DEBURRING LEFT MAIN SPAR 1.5
2/17/05 17 CUT LIGHTENING HOLES AND CAPSTRIPS FOR LEFT REAR SPAR 1.5
2/18/05 17 SET UP LEFT REAR SPAR FOR DRILLING 1
2/18/05 17 DRILLED LEFT REAR SPAR 4
2/19/05 17 DRILLED LEFT REAR SPAR 6.5
2/20/05 17 DRILLED LEFT REAR SPAR 0.5
2/21/05 15 BENT, DRILLED, AND DEBURRED ATTACH ANGLES 0.75
2/21/05 17 DEBURRED LEFT REAR SPAR 1.5
2/21/05 17 CUT LIGHTENING HOLES, SET UP, DRILLED RIGHT REAR SPAR 5
2/22/05 17 DRILLED RIGHT REAR SPAR 2
2/23/05 15 BENT, DRILLED, AND DEBURRED ATTACH ANGLES 0.75
2/23/05 17 DRILLED AND DEBURRED RIGHT REAR SPAR 5
3/11/05 5 MADE FLAP & AILERON HINGE JIG 1.5
3/11/05 5 MADE C CHANNEL DIMPLER & RIVET SET 1.5
3/11/05 21 WORKED ON WING STEEL PARTS 3
3/12/05 21 WORKED ON WING STEEL PARTS 4.5
3/13/05 21 WORKED ON WING STEEL PARTS 4.5
3/19/05 21 WORKED ON WING STEEL PARTS 3.5
3/20/05 21 WORKED ON WING STEEL PARTS 5
3/22/05 21 WORKED ON WING STEEL PARTS 2.5
3/26/05 21 WORKED ON WING STEEL PARTS 3
3/27/05 21 WORKED ON WING STEEL PARTS 1
4/2/05 21 WORKED ON WING STEEL PARTS 2
4/3/05 21 WORKED ON WING STEEL PARTS 3
4/9/05 21 WORKED ON WING STEEL PARTS 3
4/10/05 5 MADE SUPPORT FRAME JIG 0.75
4/10/05 21 WORKED ON WING STEEL PARTS 3
4/16/05 23 MADE TAILWHEEL STEERING ARMS AND BODY AND LOCK PIECES 3
7/16/05 23 MADE TAILWHEEL MAIN BODY 3
7/16/05 23 FINISHED TAILWHEEL MAIN BODY AND TAILSPRING MOUNT PIECES 3
7/19/05 23 MADE TAILWHEEL BODY CAM 0.75
1/13/07 5 MADE GRINDING TEMPLATES FOR CONTROLS 0.5
1/26/07 24 MADE FIRST CONTROL STICK STANDOFF 3
1/28/07 24 MADE SECOND CONTROL STICK STANDOFF 2.5
2/11/07 24 MADE CONTROL STICK BEARINGS 5
2/12/07 24 FINISHED CONTROL STICK BEARINGS 1
2/12/07 5 MADE JIG FOR CONTROL ASSEMBLY 0.5
2/12/07 24 MADE CONTROL LINK ENDS 1.5
2/16/07 24 FINISHED CONTROL LINK 2.5
2/17/07 24 MADE CONTROL STICK BRACKET ASSEMBLY 3
2/17/07 24 FINISHED CONTROL STICK BRACKET ASSEMBLY 1.5
2/18/07 24 CUT PIECES FOR CONTROL STICKS 3
2/19/07 24 FINISHED CONTROL STICKS 4.5
2/21/07 5 MADE GRINDING TEMPLATES FOR RUDDER PEDALS 0.5
2/23/07 24 MADE PARTS FOR RUDDER PEDAL ASSEMBLY 3.25
2/24/07 24 MADE RUDDER PEDALS 3.5
2/25/07 5 MADE JIG FOR BRAKE PEDALS 1.5
2/25/07 24 MADE BRAKE PEDALS 2.5
3/3/07 24 FINISHED BRAKE PEDALS, ASSEMBLED RUDDER PEDAL ASSEMBLY 8.75
3/4/07 24 FINISHED RUDDER PEDAL ASSEMBLY 11.5
3/10/07 5 ALTERED WORK BENCHES TO ASSEMBLY TABLE 4
3/17/07 23 WORKED ON ELEVATOR & RUDDER HINGES 3
3/18/07 23 WORKED ON ELEVATOR & RUDDER HINGES 4.25
3/18/07 5 MADE GRINDING TEMPLATES FOR TAIL GROUP 0.5
3/23/07 23 FINISHED ELEVATOR & RUDDER HINGES 2.75
3/24/07 23 MADE ELEVATOR HORN AND RUDDER HORN 3
3/25/07 23 MADE TAIL WIRE TABS 2
3/30/07 23 CUT TRIM TAB HINGES 1
4/6/07 23 SHEARED AND BENT T-25 RIBS 4
4/7/07 23 FINISHED BENDING T-25 RIBS 2.5